Applications and Uses
- Chemical Industries
- Oil & Gas Industrires
- Power Plant Industries
- Shipbuilding Industries
- Fertilizer Industrires
- Petrochemical Industrires
- Sugar Industrires
- Cement Industrires
The Inconel 600 Washers are made up of an alloy where nickel is the base element. Along with nickel, chromium is also present in the chemical composition. The Inconel 601 Washers are made up of an alloy that is so strong that it is corrosion resistant even at elevated temperatures.
The Inconel 625 Washers are made up of a chemical composition where nickel is the base element. Along with nickel there are also other elements such as chromium and molybdenum present in its chemical composition. There also is an addition of aluminum and titanium.
The Inconel 718 Flat Washers provide resistance towards corrosion, and they also provide the property of toughness. The Inconel X-750 Washers are also used in atmospheres which are bound with various temperature ranges. The Incoloy 825 Washers are also resistant towards corrosion. Incoloy 800HT Washers also have great characteristics of ductility. The Incoloy 925 Washers also has a chemical composition where nickel is the base element and has chromium as well as molybdenum. It also has copper and titanium present in its chemical composition.
Specification | ASTM / ASME SB 166 / 164 / 425 / 166 / 446 / 574 / 472 |
Standard |
DIN : DIN 934, DIN 931, DIN 970, DIN 933 UTS : UNEF, NPT, UNC, UNS, UNF, NPTF ISO : JIS standards, ISO 4033, ISO 4032, ANSI – American National Standards Institute ASME B18.5 ANSI B 28.2.4 1M as per defined in ASME B16.5 standard Monel Monel® Alloy 400 Stud nuts length ANSI B 18.2.4 2M as per defined in ASME B18.2.2 Monel Alloy 400 Hex nuts |
Size | M3 - M56 | 3/6" to 2" | Custom Sizes |
Length | 3 mm to 200 mm | Custom Sizes |
Dimensions | DIN, ISO, ASTM, JIS, BS, GB, IS and all International Standards |
Form | Hex, Threading, Square, Round as per Gauge Etc. |
Threads | Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically |
Threads available | UNF, BSW, BSF, METRIC, UNC, or as required |
Threads Configuration |
ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
Certification | Dual Certified As per ASTM & ASME Codes |
Test Certificate | As per EN 10204 / 3.1 Manufacturer Test Certificate, PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
Raw materials Source | JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin,etc. |
Packing | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
Surface Coating |
Cadmium Coating Hot Dipped Galvanizing Coating Ptfe Coated Phosphate Coating Teflon Coating Xylon Coating Zinc Coating |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
Inconel 600 | 2.4816 | N06600 | NCF 600 | NA 13 | МНЖМц 28-2,5-1,5 | NC15FE11M | NiCr15Fe |
Inconel 601 | 2.4851 | N06601 | NCF 601 | NA 49 | XH60BT | NC23FeA | NiCr23Fe |
Inconel 625 | 2.4856 | N06625 | NCF 625 | NA 21 | ХН75МБТЮ | NC22DNB4M | NiCr22Mo9Nb |
Inconel 718 | 2.4668 | N07718 | - | - | - | - | - |
Inconel X-750 | 2.4669 | N07750 | - | - | - | - | - |
Incoloy 825 | 2.4858 | N08825 | NCF 825 | NA 16 | ЭП703 | NFE30C20DUM | NiCr21Mo |
Incoloy 800HT | 1.4859 / 1.4876 | N08811 | NCF 800HT | NA 15(HT) | ЭИ670 | - | X8NiCrAlTi32-21 |
Incoloy 925 | - | N09925 | NCF 925 | - | - | - | - |
Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
Inconel 600 | 0.15 max | 1.00 max | 0.50 max | 0.015max | 0.50 max | 6.00 – 10.00 | 72.00 min | 14.00 – 17.00 |
Inconel 601 | 0.10 max | 1.0 max | 0.5 max | 0.015 max | 1.0 max | Balance | 58.0 – 63.0 | 21.0 – 25.0 |
Inconel 625 | 0.10 max | 0.50 max | 0.50 max | 0.015 max | - | 5.0 max | 58.0 min | 20.0 - 23.0 |
Inconel 718 | 0.08 max | 0.35 max | 0.35 max | 0.015 max | 0.30 max | - | 50.00 - 55.00 | 17.00 - 21.00 |
Incoloy X-750 | 0.08 max | 1.00 max | 0.50 max | 0.01 max | 0.50 max | 5.0 - 9.0 | 70.00 min | 14.00 - 17.00 |
825 | 0.05 max | 1.00 max | 0.5 max | 0.03 max | 1.50 – 3.00 | 22.00 min | 38.00 – 46.00 | 19.50 – 23.50 |
800HT | 0.06 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 |
800HT | 0.03 max | 1.00 max | 0.5 max | 0.03 max | 1.5 - 3.0 | 22 min | – | 19.5 - 22.5 |
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Inconel 600 | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |
Inconel 601 | 8.1 g/cm3 | 1411 °C (2571 °F) | Psi – 80,000 , MPa – 550 | Psi – 30,000 , MPa – 205 | 30 % |
Inconel 625 | 8.4 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 517 | 42.5 % |
Inconel 718 | 8.2 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 482 | 45 % |
Inconel X-750 | - | 1430°C | 1267 MPa | 868 MPa | 25 % |
825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
800HT | 7.94 g/cm3 | 1385 °C (2525 °F) | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa – 205 | 30 % |
925 | 8.08 g/cm3 | 1311°C-1366 °C | 685 MPa | 271 MPa | 56% |