The 310 alloy is an austenitic stainless steel alloy that is commonly used in applications requiring strong temperature resistance and hence provide corrosion resistance. These alloys can tolerate oxidation up to 2010 degrees Fahrenheit. This alloy has a high level of chromium as well as a significant amount of nickel. The chromium percentage in them is 25%, whereas the nickel content is 20%.
These STAINLESS STEEL 310 BOLTS are made from high-quality raw materials, which results in high-quality STAINLESS STEEL 310 BOLT. They also have built-in compliance with applicable standards and laws. Furthermore, when manufacturing these STAINLESS STEEL 310 BOLT, the necessary standards, regulations, and guidelines are followed, resulting in high-quality products.
Also, these STAINLESS STEEL 310 BOLTS are subjected to several chemical and physical tests, which make them more durable, stronger, and flexible, as well as boosts more of its capabilities and so improves the entire product quality. As a result, it is regarded as one of the bolts that can not only resist oxidation in adverse settings, but also perform efficiently in these situations and have a long life. Therefore these are used in a wide range of industrial applications because of the properties and the characteristics that they have.
| Specifications | DIN, ISO ,JIS ,GB, IS, BS, ASTM |
| Standard | ASTM / ASME SB 160 / 164 / 425 / 166 / 446 / 574 / 472 |
| Size | M0.2 to M33 | 3/6" to 2" | Custom Sizes |
| Length | 3 mm to 200 mm | Custom Sizes |
| Dimensions | DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 |
| Form | Hex, Threading, Square, Round as per Gauge Etc. |
| Threads | Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically |
| Threads available | UNF, BSW, BSF, METRIC, UNC, or as required |
| Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
| Certification | Dual Certified As per ASTM & ASME Codes |
| Test Certificate | As per EN 10204 / 3.1 Manufacturer Test Certificate, PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
| Raw materials Source | JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin,etc. |
| Packing | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
| Surface Coating |
Cadmium Coating Hot Dipped Galvanizing Coating Ptfe Coated Nickel Alloy 200 Bolts Phosphate Coating Teflon Coating Xylon Coating Zinc Coating |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | EN |
| SS 310 | 1.4841 | S31000 | SUS 310 | 310S24 | 20Ch25N20S2 | X15CrNi25-20 |
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
| SS 310 | 0.015 max | 2.0 max | 0.15 max | 0.020 max | 0.015 max | 24.00 - 26.00 | 0.10 max | 19.00 - 21.00 | 54.7 min |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.9 g/cm3 | 1402 °C (2555 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40 % |
