These ASTM A193 B8C Bolts are manufactured using high-quality raw materials, resulting in high-quality ASTM A193 B8C Bolts. They are also made in accordance with applicable norms and rules. Furthermore, the essential rules, regulations, and guidelines are followed when producing these ASTM A193 B8C Bolts, resulting in high-quality items. These ASTM A193 B8C Bolts have a nice finish as well.
The ASTM A193 B8C Bolts could be available in different shapes, sizes, as well as dimensions, depending upon the need as well as the requirement of the applications or the specifications provided by the client. The ASTM A193 B8C Bolts are resistant to corrosion. The ASTM A193 B8C Bolts also have high tensile strength and therefore are used in applications where tensile strength is required. The ASTM A193 B8C Bolts could also perform well in environments where they would have to withstand high temperatures.
These ASTM A193 B8C Bolts also have to undergo a series of tests to test and improve their quality. These tests are performed on them so that excellent quality fasteners are produced. The ASTM A193 B8C Bolts have a chemical composition that provides them with the properties as well as the characteristics that they have. This is why these ASTM A193 B8C Bolts are used in a wide range of industrial applications.
| Specifications | ASTM F593, F594, F1554 / ASME SF593, F594, F1554 |
| Standard |
DIN : DIN 934, DIN 931, DIN 970, DIN 933 UTS : UNEF, NPT, UNC, UNS, UNF, NPTF ISO : JIS standards, ISO 4033, ISO 4032, ANSI – American National Standards Institute ASME B18.5 ANSI B 28.2.4 1M as per defined in ASME B16.5 standard length ANSI B 18.2.4 2M as per defined in ASME B18.2.2 |
| Size | M3 - M56 | 3/6" to 2" | Custom Sizes |
| Length | 3 mm to 200 mm | Custom Sizes |
| Dimensions | DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 |
| Form | Hex, Threading, Square, Round as per Gauge Etc. |
| Threads | Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically |
| Threads available | UNF, BSW, BSF, METRIC, UNC, or as required |
| Threads Configuration |
ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
| Certification | Dual Certified As per ASTM & ASME Codes |
| Test Certificate | As per EN 10204 / 3.1 Manufacturer Test Certificate, PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
| Raw materials Source | JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin,etc. |
| Packing | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
| Surface Coating |
Cadmium Coating Hot Dipped Galvanizing Coating Ptfe Coated Phosphate Coating Teflon Coating Xylon Coating Zinc Coating |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| B8C(AISI 347) | 1.4550 | S34700 | SUS 347 | - | - | - | X6CrNiNb18-10 |
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| B8C (AISI 347) | 0.08 max | 2.00 max | 1.00 max | 0.045 max | 0.030 max | 17.00 - 19.00 | - | 12.00 - 13.00 | - |
| Bolt Grade | Diameter, in. | Tensile Strength, ksi | Yield Strength ksi | Elongation, % | Reduction, % | Hardness |
|---|---|---|---|---|---|---|
| B8C Class 1A | All Sizes | 75 | 30 | 30 | 50 | 223 HBW or 96 HRBC |
|
B8C Class 2B |
3/4 and under | 125 | 100 | 12 | 35 |
321 HBW or 35 HRC |
| over 3/4 to 1, inclusive | 115 | 80 | 15 | 35 | ||
| over 1 to 1-1⁄4, inclusive | 105 | 65 | 20 | 35 | ||
| over 1-1⁄4 to 11⁄2, inclusive | 100 | 50 | 28 | 45 |
